Home » Articles posted by John

Highspeed machining courtesy of Kyocera

Cutting an 18mm x 97mm x 75mm deep slot in En24T with a Kyocera MFH17-S16-2T RAPTOR, a  twin insert Highfeed 17mm indexable endmill…

0.7mm feed/tooth, 0.5mm depth of cut, 160m/min.

Zig-zag slot cut then wall finish to size @ z-0.4mm per pass.    It will go quicker with less overhang.

Machine: Dugard Eagle 1000 VMC